LF411CD
| Parameters | |
|---|---|
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 670mW |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LF411 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 3.4mA |
| Max Supply Current | 3.4mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 7V~36V ±3.5V~18V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 800μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LF411CD Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a J-FET type op amp. There is a Tube case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. Op amp ic rates 2mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. This op amp can operate from a supply current at 2mA. Keeping the voltage gain at 106.02dB is the best course of action. There are 1 channels on the operational amplifiers.
LF411CD Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
LF411CD Applications
There are a lot of Texas Instruments LF411CD Instrumentational OP Amps applications.
- Multiplication circuits
- Portable media players
- Signal transformation
- Semiconductor detectors
- Oscilloscopes
- Weak signal detection
- Strain gauges
- Inverse/same-phase proportional circuit
- Polarized electrodes
- Information processing