LC5768VG-10F484C
| Parameters | |
|---|---|
| Memory Type | ROMless |
| Propagation Delay | 10 ns |
| Max Frequency | 178MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 768 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 2.6mm |
| Length | 23mm |
| Width | 23mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 484-BBGA |
| Number of Pins | 484 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH™ 5000VG |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 484 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5768 |
| Pin Count | 484 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 380mA |
| Number of I/O | 304 |
| Nominal Supply Current | 380mA |
LC5768VG-10F484C Overview
A mobile phone network consists of 768macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 484-BBGA.As you can see, this device has 304 I/O ports programmed into it.The device is programmed with 484 terminations.This electrical component has a terminal position of 0.The power source is powered by 3.3Vvolts.It is included in Programmable Logic Devices.As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.It is a type of FPGA belonging to the ispMACH? 5000VG series.A chip with 484pins is programmed.This device also displays [0].The LC5768can be used to identify its related parts.If high efficiency is desired, the supply voltage should be kept at [0].ROMless is adopted for storing data.This electronic part is mounted in the way of Surface Mount.This board has 484 pins.This device operates at a voltage of 3.6Vas its maximum supply voltage.Normally, it operates with a voltage of 3VV as its minimum supply voltage.This logic element/block contains 24logic elements.A total of 144 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 178MHz.
LC5768VG-10F484C Features
484-BBGA package
304 I/Os
The operating temperature of 0°C~90°C TJ
484 pin count
484 pins
LC5768VG-10F484C Applications
There are a lot of Lattice Semiconductor Corporation LC5768VG-10F484C CPLDs applications.
- Page register
- Digital systems
- STANDARD SERIAL INTERFACE UART
- ROM patching
- Address decoders
- Code converters
- Custom state machines
- ON-CHIP OSCILLATOR CIRCUIT
- Power automation
- Software-Driven Hardware Configuration