LC5512MV-45F256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispXPLD® 5000MV |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC5512 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 33mA |
| Number of I/O | 193 |
| Nominal Supply Current | 33mA |
| RAM Size | 32kB |
| Memory Type | EEPROM, SRAM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Number of Logic Elements/Cells | 16 |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC5512MV-45F256C Overview
Currently, there are 512 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A 256-BGA package contains the item.There are 193 I/Os on the board.Terminations of devices are set to [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.The power supply voltage is 3.3V.There is a part included in Programmable Logic Devices.Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.It is a type of FPGA belonging to the ispXPLD? 5000MV series.A chip with 256pins is programmed.When using this device, YEScan also be found.The LC5512contains its related parts.Optimal efficiency requires a supply voltage of [0].It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.There are 256 pins on the device.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 3Vis required.A programmable I/O count of 100 has been recorded.This can be achieved at a frequency of 333MHz.As a fundamental building block, there are 16 logic elements/cells.
LC5512MV-45F256C Features
256-BGA package
193 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC5512MV-45F256C Applications
There are a lot of Lattice Semiconductor Corporation LC5512MV-45F256C CPLDs applications.
- Handheld digital devices
- Parity generators
- High speed graphics processing
- Reset swapping
- POWER-SAVING MODES
- ROM patching
- Preset swapping
- State machine design
- Address decoders
- LED Lighting systems