LC4384C-75FT256C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 24 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-75FT256C Overview
Currently, there are 384 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].It is equipped with 192I/O ports.Terminations of devices are set to [0].Its terminal position is BOTTOM.The power supply voltage is 1.8V.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.It belongs to the ispMACH? 4000Cseries of FPGAs.With 256pins programmed, the chip is ready to use.This device also displays [0].The LC4384shows its related parts.For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].The electronic part is mounted by Surface Mount.The 256pins are designed into the board.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.The minimal supply voltage is 1.65V.24logic elements/blocks exist.Ideally, the maximal frequency should be lower than 322MHz Hz.Input signals are detected by 4dedicated inputs.
LC4384C-75FT256C Features
256-LBGA package
192 I/Os
The operating temperature of 0°C~90°C TJ
256 pin count
256 pins
LC4384C-75FT256C Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-75FT256C CPLDs applications.
- Page register
- Address decoders
- INTERRUPT SYSTEM
- Power automation
- Wide Vin Industrial low power SMPS
- White goods (Washing, Cold, Aircon ,...)
- I2C BUS INTERFACE
- Interface bridging
- Synchronous or asynchronous mode
- Software-Driven Hardware Configuration