LC4384C-10FT256I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4384 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 3.5mA |
| Number of I/O | 192 |
| Nominal Supply Current | 3.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 322MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 24 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4384C-10FT256I Overview
There are 384 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).256-LBGAis the package in which it resides.It is equipped with 192I/O ports.The device is programmed with 256 terminations.There is a BOTTOMterminal position on the electrical part in question.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].Ensure that the chip is mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.It is equipped with 256 pin count.Additionally, this device is capable of displaying [0].Its related parts can be found in the [0].High efficiency requires the supply voltage to be maintained at [0].For data storage, EEPROMis adopted.The electronic component is mounted by Surface Mount.This board has 256 pins.It operates with the maximal supply voltage of 1.95V.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.This logic element/block contains 24logic elements.Ideally, the maximal frequency should be lower than 322MHz Hz.Input signals are detected using 4dedicated inputs.
LC4384C-10FT256I Features
256-LBGA package
192 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
256 pins
LC4384C-10FT256I Applications
There are a lot of Lattice Semiconductor Corporation LC4384C-10FT256I CPLDs applications.
- USB Bus
- Digital systems
- D/T registers and latches
- Programmable polarity
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Multiple Clock Source Selection
- Code converters
- Voltage level translation
- Address decoders
- Protection relays