LC4256V-75FT256BI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 160 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 16 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256V-75FT256BI Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.256-LBGAis the package in which it resides.This device has 160 I/O ports programmed into it.Terminations of devices are set to [0].Its terminal position is BOTTOM.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.Trayis the packaging method.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.There should be a Surface Mounton the chip.The FPGA belongs to the ispMACH? 4000V series.There are 256 pins on the chip.If you use this device, you will also find [0].The LC4256shows its related parts.The supply voltage should be maintained at 3.3V for high efficiency.It is recommended that data be stored in [0].Surface Mountmounts this electronic component.A maximum voltage of 3.6Vis required for operation.Normally, it operates with a voltage of 3VV as its minimum supply voltage.16logic blocks/elements are present.This frequency can be achieved at 178.57MHz.The system consists of 36 logic blocks (LABs).The input signals are detected by 4dedicated inputs.
LC4256V-75FT256BI Features
256-LBGA package
160 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
36 logic blocks (LABs)
LC4256V-75FT256BI Applications
There are a lot of Lattice Semiconductor Corporation LC4256V-75FT256BI CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Interface bridging
- I2C BUS INTERFACE
- Power up sequencing
- ToR/Aggregation/Core Switch and Router
- INTERRUPT SYSTEM
- Power Meter SMPS
- Software-Driven Hardware Configuration
- Programmable polarity
- Bootloaders for FPGAs