LC4256C-75T100I
| Parameters | |
|---|---|
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 96 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
LC4256C-75T100I Overview
256macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 100-LQFP package.This device has 64 I/O ports programmed into it.100terminations have been programmed into the device.The terminal position of this electrical component is QUAD.There is 1.8V voltage supply for this device.This part is in the family [0].Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.It is equipped with 100 pin count.If this device is used, you will also be able to find [0].According to the LC4256, its related parts can be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].A Surface Mountis mounted on this electronic component.This board has 100 pins.It operates at a maximum supply voltage of 1.95V volts.It is powered by 1.65Vas its minimum supply voltage.Currently, there are 96 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 322MHz.Input signals are detected by 10dedicated inputs.A fundamental building block of logic consists of 16logic elements/cells.
LC4256C-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4256C-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4256C-75T100I CPLDs applications.
- Synchronous or asynchronous mode
- INTERRUPT SYSTEM
- Page register
- Pattern recognition
- Multiple DIP Switch Replacement
- Voltage level translation
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Boolean function generators
- White goods (Washing, Cold, Aircon ,...)
- ON-CHIP OSCILLATOR CIRCUIT