LC4256B-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 16 |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 80 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4256B-75T100C Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.It is embedded in the 100-LQFP package.In this case, there are 64 I/Os programmed.The termination of a device is set to [0].The terminal position of this electrical component is QUAD.The power source is powered by 2.5Vvolts.This part is in the family [0].Trayshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is mounted in the way of Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000B series.It is programmed with 100 pins.If you use this device, you will also find [0].The LC4256indicates that related parts can be found.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.There are 100pins on it.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.A total of 80 Programmable I/Os are available.There should be a lower maximum frequency than 322MHz.Input signals are detected by 10dedicated inputs.The fundamental building block consists of 16logic elements/cells.
LC4256B-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4256B-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-75T100C CPLDs applications.
- Digital multiplexers
- Interface bridging
- Code converters
- PULSE WIDTH MODULATION (PWM)
- Field programmable gate
- Wide Vin Industrial low power SMPS
- Discrete logic functions
- Power Meter SMPS
- ON-CHIP OSCILLATOR CIRCUIT
- State machine design