LC4256B-10FT256AI
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12.5mA |
| Number of I/O | 128 |
| Nominal Supply Current | 12.5mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 322MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
LC4256B-10FT256AI Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 128 I/Os.Terminations of devices are set to [0].BOTTOMis the terminal position of this electrical part.The device is powered by a voltage of 2.5V volts.It is a part of the family [0].Trayshould be used for packaging the chip.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.The chip is programmed with 256 pins.The device can also be used to find [0].The LC4256shows its related parts.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.In this case, it is mounted by Surface Mount.There is a maximum supply voltage of 2.7V.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.A total of 16logic elements/blocks are present.A total of 160 Programmable I/Os are available.It is recommended not to exceed 322MHzin terms of frequency.The input signals are detected by 4dedicated inputs.
LC4256B-10FT256AI Features
256-LBGA package
128 I/Os
The operating temperature of -40°C~105°C TJ
256 pin count
LC4256B-10FT256AI Applications
There are a lot of Lattice Semiconductor Corporation LC4256B-10FT256AI CPLDs applications.
- Dedicated input registers
- I/O PORTS (MCU MODULE)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Voltage level translation
- State machine control
- Random logic replacement
- Power automation
- Power Meter SMPS
- Wide Vin Industrial low power SMPS
- Portable digital devices