LC4128B-5T100I
| Parameters | |
|---|---|
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4128 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 333MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
LC4128B-5T100I Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is embedded in the 100-LQFP package.It is programmed with 64 I/Os.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.Package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.A chip with 100pins is programmed.This device also displays [0].Its related parts can be found in the [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis used to mount this electronic component.100pins are included in its design.It operates at a maximum supply voltage of 2.7V volts.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.In total, there are 8 logic elements/blocks.In total, there are 484programmable I/Os.There should be a lower maximum frequency than 333MHz.There are 10 dedicated inputs used to detect the status of input signals.
LC4128B-5T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4128B-5T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4128B-5T100I CPLDs applications.
- Digital multiplexers
- Address decoding
- Programmable power management
- Field programmable gate
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Software Configuration of Add-In Boards
- Auxiliary Power Supply Isolated and Non-isolated
- I2C BUS INTERFACE
- LED Lighting systems
- Wireless Infrastructure Base Band Unit and Remote Radio Unit