LC4064ZC-75TN100I
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
LC4064ZC-75TN100I Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].There are 64 I/Os on the board.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].Package the chip by Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.There are 100pins on the chip.If you use this device, you will also find [0].The LC4064indicates that related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis used to mount this electronic component.A total of 100pins are provided on this board.A maximum voltage of 1.9Vis required for operation.Initially, it requires a voltage of 1.7Vas the minimum supply voltage.4logic blocks/elements are present.There is a maximum frequency of 178.57MHz.The status of input signals is determined by 10dedicated inputs.As a fundamental building block, there are 36 logic elements/cells.
LC4064ZC-75TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064ZC-75TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75TN100I CPLDs applications.
- Field programmable gate
- Multiple Clock Source Selection
- ON-CHIP OSCILLATOR CIRCUIT
- Auxiliary Power Supply Isolated and Non-isolated
- D/T registers and latches
- I2C BUS INTERFACE
- Software Configuration of Add-In Boards
- Digital designs
- Page register
- Wireless Infrastructure Base Band Unit and Remote Radio Unit