LC4064ZC-5TN100C
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 32 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-5TN100C Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.100-LQFPis the package in which it resides.There are 64 I/Os on the board.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 1.8V volts.This part is part of the family [0].It is packaged in the way of Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.It has 100pins programmed.If this device is used, you will also be able to find [0].Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].For storing data, it is recommended to use [0].It is mounted by Surface Mount.There are 100 pins embedded in the device.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.A minimum supply voltage of 1.7V is required for it to operate.4logic blocks/elements are present.A total of 484 Programmable I/Os are available.There can be 250MHz frequency achieved.Input signals are detected by 10dedicated inputs.There are 32 logic elements/cells on the device.
LC4064ZC-5TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064ZC-5TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5TN100C CPLDs applications.
- Address decoding
- Random logic replacement
- Software-Driven Hardware Configuration
- State machine design
- Power up sequencing
- Software-driven hardware configuration
- High speed graphics processing
- POWER-SAVING MODES
- Voltage level translation
- Dedicated input registers