LC4064ZC-37T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.7ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-37T48C Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 48-LQFP package contains the item.There are 32 I/Os on the board.48terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.It is powered from a supply voltage of 1.8V.It is included in Programmable Logic Devices.It is packaged in the way of Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.As part of the ispMACH? 4000Zseries, it is a type of FPGA.Chips are programmed with 48 pins.It is also characterized by YES.The LC4064indicates that its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.This electronic part is mounted in the way of Surface Mount.The device has a pinout of [0].In this case, the maximum supply voltage is 1.9V.It is powered by 1.7Vas its minimum supply voltage.4logic elements/blocks exist.Programmable I/Os are counted up 388.There should be a lower maximum frequency than 250MHz.There are 4 dedicated inputs used to detect the status of input signals.
LC4064ZC-37T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4064ZC-37T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37T48C CPLDs applications.
- Software-driven hardware configuration
- USB Bus
- Storage Cards and Storage Racks
- Pattern recognition
- ToR/Aggregation/Core Switch and Router
- Code converters
- D/T registers and latches
- Preset swapping
- Synchronous or asynchronous mode
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)