LC4064ZC-37MN132C
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.7ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-37MN132C Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 132-LFBGA, CSPBGA.The device has 64inputs and outputs.There is a 132terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.It is a part of family [0].It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the ispMACH? 4000Zseries of FPGAs.A chip with 132pins is programmed.Additionally, this device is capable of displaying [0].You can find its related parts in the [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.The device is designed with pins [0].It operates at a maximum supply voltage of 1.9V volts.With a minimal supply voltage of [0], it operates.A logic element or block has 4elements.In total, there are 388programmable I/Os.The maximal frequency should be lower than 250MHz.It has 10dedicated inputs for detecting input signals.
LC4064ZC-37MN132C Features
132-LFBGA, CSPBGA package
64 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4064ZC-37MN132C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37MN132C CPLDs applications.
- Configurable Addressing of I/O Boards
- Field programmable gate
- Wide Vin Industrial low power SMPS
- Synchronous or asynchronous mode
- Code converters
- Storage Cards and Storage Racks
- Parity generators
- I/O PORTS (MCU MODULE)
- Bootloaders for FPGAs
- Custom state machines