LC4064C-25TN48C
| Parameters | |
|---|---|
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 32 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 454.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
LC4064C-25TN48C Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).48-LQFPis the package in which it resides.As you can see, this device has 32 I/O ports programmed into it.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 1.8V volts.There is a part in the family [0].Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].It is recommended to mount the chip by Surface Mount.The ispMACH? 4000Cseries FPGA is one of these types.There are 48pins on the chip.This device can also display [0].The LC4064indicates that related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountmounts this electronic component.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.In total, there are 256programmable I/Os.This frequency can be achieved at 454.5MHz.The status of input signals is detected by 4dedicated inputs.An elementary building block consists of 4logic elements/cells.
LC4064C-25TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4064C-25TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-25TN48C CPLDs applications.
- Battery operated portable devices
- Reset swapping
- Software-Driven Hardware Configuration
- Software Configuration of Add-In Boards
- Power Meter SMPS
- PLC analog input modules
- Multiple Clock Source Selection
- Address decoding
- Address decoders
- Digital multiplexers