LC4064B-25T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 2.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-25T100C Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is embedded in the 100-LQFP package.In this case, there are 64 I/Os programmed.100terminations have been programmed into the device.QUADis the terminal position of this electrical part.It is powered by a voltage of 2.5V volts.It is a part of family [0].Package the chip by Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Bseries, it is a type of FPGA.Chips are programmed with 100 pins.The device can also be used to find [0].There are related parts in [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.There are 100 pins embedded in the device.It operates at a maximum supply voltage of 2.7V volts.Despite its minimal supply voltage of [0], it is capable of operating.A total of 208programmable I/Os are available.It is recommended that the maximum frequency be less than 400MHz.Input signals are detected using 10dedicated inputs.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064B-25T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064B-25T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-25T100C CPLDs applications.
- Code converters
- D/T registers and latches
- Multiple Clock Source Selection
- Pattern recognition
- Complex programmable logic devices
- Storage Cards and Storage Racks
- Page register
- DDC INTERFACE
- I/O PORTS (MCU MODULE)
- Software-Driven Hardware Configuration