LC4064B-10TN48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-10TN48I Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the 48-LQFP package.The device has 32inputs and outputs.Terminations of devices are set to [0].QUADis the terminal position of this electrical part.The power source is powered by 2.5Vvolts.This part is in the family [0].It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.Chips are programmed with 48 pins.This device can also display [0].According to the LC4064, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 48 pins on the device.There is a maximum supply voltage of 2.7V.It is powered by 2.3Vas its minimum supply voltage.4logic elements/blocks exist.In total, there are 208programmable I/Os.Ideally, the maximal frequency should be lower than 400MHz Hz.Input signals are detected by 4dedicated inputs.
LC4064B-10TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064B-10TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-10TN48I CPLDs applications.
- INTERRUPT SYSTEM
- Software-Driven Hardware Configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- PLC analog input modules
- ON-CHIP OSCILLATOR CIRCUIT
- TIMERS/COUNTERS
- DDC INTERFACE
- LED Lighting systems
- Bootloaders for FPGAs
- Wide Vin Industrial low power SMPS