LC4032C-75T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1.8mA |
| Number of I/O | 32 |
| Nominal Supply Current | 1.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 128 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032C-75T48I Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 32 I/Os on the board.There is a 48terminations set on devices.This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 1.8V volts.The part belongs to Programmable Logic Devices family.Trayis the packaging method.Ensure its reliability by operating at [0].Chips should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.It has 48pins programmed.Additionally, this device is capable of displaying [0].LC4032contains its related parts.As a building block for digital circuits, there are 800gates.High efficiency requires a voltage supply of [0].EEPROM is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.There are 48 pins on the device.There is a maximum supply voltage of 1.95V.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.A total of 128programmable I/Os are available.The maximal frequency should be lower than 400MHz.The input signals are detected by 4dedicated inputs.There are 2 logic elements/cells on the device.
LC4032C-75T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4032C-75T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4032C-75T48I CPLDs applications.
- Address decoders
- Battery operated portable devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software-driven hardware configuration
- Multiple Clock Source Selection
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Digital systems
- White goods (Washing, Cold, Aircon ,...)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Auxiliary Power Supply Isolated and Non-isolated