LC4032B-75TN44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4032 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 11.8mA |
| Number of I/O | 30 |
| Nominal Supply Current | 11.8mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 800 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 100 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4032B-75TN44I Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].The device is programmed with 30 I/O ports.The device is programmed with 44 terminations.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 2.5Vprovides power to the device.It belongs to the family [0].Trayshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Bseries, it is a type of FPGA.With 44pins programmed, the chip is ready to use.If you use this device, you will also find [0].The LC4032shows its related parts.For digital circuits, there are 800gates. These devices serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.There are 44 pins embedded in the device.There is a maximum supply voltage of 2.7V.Initially, it requires a voltage of 2.3Vas the minimum supply voltage.This logic block consists of 2logic elements.Currently, there are 100 Programmable I/Os available.There should be a lower maximum frequency than 400MHz.To detect input signals, there are 2 dedicated inputs.
LC4032B-75TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4032B-75TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4032B-75TN44I CPLDs applications.
- DDC INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple DIP Switch Replacement
- Voltage level translation
- Timing control
- Interface bridging
- USB Bus
- Bootloaders for FPGAs
- Address decoders
- Protection relays