LB1838M-TLM-E
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -20°C~75°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Applications | Battery Powered |
| Voltage - Supply | 2.5V~9V |
| Base Part Number | LB1838M |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Output Voltage | 9V |
| Max Output Current | 1A |
| Interface | Parallel |
| Nominal Supply Current | 10μA |
| Output Configuration | Half Bridge (4) |
| Collector Emitter Voltage (VCEO) | 9V |
| Max Collector Current | 1A |
| Voltage - Load | 1.8V~9V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Height | 1.5mm |
| Length | 8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB1838M-TLM-E Overview
The package contains [0].The part is packged with 14-LSOP (0.173, 4.40mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to Battery Powered.There is a capability for the device to provide 2.5V~9V volts.Drivers controllers operates wDrivers controllershin a range of -20°C~75°C TAdegrees Celsius.If the voltage is applied to the load at the rate of [0], the load will be affected.Surface Mountis its recommended mounting method.This can be determined by looking at the LB1838M part number.Drivers controllers is designed wDrivers controllersh 14 pins.There are 2 outputs available.In this case, 9Vis maintained as the output voltage.Stepperrepresents the motor type.Its maximal output current reaches 1A to meet the operation requirements.
LB1838M-TLM-E Features
Applications : Battery Powered
Load voltage across the chip 1.8V~9V
base on LB1838M number
designed with 2 outputs
Motor Type classified as Stepper
LB1838M-TLM-E Applications
There are a lot of ON Semiconductor LB1838M-TLM-E motor drivers applications.
- LCD displays
- Large outdoor LED display
- Hospitality buildings
- Running preventive- maintenance diagnostics
- Outdoor area lights
- Hazardous application
- Fog lamps
- Dash
- Scanning equipment
- Side marker lights