LB11961V-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -30°C~90°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Base Part Number | LB11961 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Max Output Current | 1A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 18mA |
| Output Configuration | Half Bridge (2) |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 24mA |
| Collector Emitter Voltage (VCEO) | 16V |
| Max Collector Current | 1A |
| Voltage - Load | 4.5V~16V |
| Switching Frequency | 25kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushed DC |
| Height | 1.3mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11961V-TLM-H Overview
The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 16-LSSOP (0.173, 4.40mm Width) case.To mount the part by [0], it is recommended that you do so.This component is suitable for the component connected to Fan Motor Driver.A device with a voltage range of 4.5V~16V volts is available.Regarding the operating temperature, it is in the range of -30°C~90°C TA°C.In this case, the motor type is Brushed DC.This part provides 16terminations.The voltage can applied to the load at the rate of 4.5V~16V.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.Its recommended mounting way is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.The part number LB11961indicates that it is found.16pins are present on the device.The Motion Control Electronicsseries contains it.A total of 1outputs are available.18Vis maintained as the output voltage.A motor type of Brushless DC (BLDC)can be recognized.As a result, the maximum output current reaches 1Ain order to meet the requirements of the operation.
LB11961V-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 4.5V~16V
base on LB11961 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
LB11961V-TLM-H Applications
There are a lot of ON Semiconductor LB11961V-TLM-H motor drivers applications.
- Horticultural lighting
- General lighting
- Fog lamps
- LED bias
- Handheld devices
- Mobile phone display backlight and key light driving
- Digital still cameras
- Large outdoor LED display
- Hazardous application
- Hidden coves in high-end residential settings