LB11961-TLM-H
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs |
| Number of Pins | 14 |
| Operating Temperature | -30°C~90°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LB11961 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 16V |
| Operating Supply Voltage | 16V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 24mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 1.1W |
| Current - Output | 1A |
| Logic Function | AND |
| Halogen Free | Halogen Free |
| Voltage - Load | 4.5V~16V |
| Motor Type - AC, DC | Brushed DC |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LB11961-TLM-H Overview
This package was designed with Tape & Reel (TR)in mind.There is 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs case included with the part.Drivers controllers is recommended that the part be mounted by Surface Mount.This component is suitable for the component connected to Fan Motor Driver.The device can supply 4.5V~16V volts.This device operates at a temperature of -30°C~90°C TA.The motor type can be classified as Brushed DC.A total of 14terminations are available in this part.In this case, the voltage can be applied to the load at the rate of 4.5V~16V.The amplifier should be set to 12V.Ideally, it should be mounted in the Surface Mountposition.Maintain a current of 1A for the part output.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.The LB11961part number is used to locate the part.14 pins are provided for its design.In the Motion Control Electronicsseries, it is included.The number of outputs available is [0].A voltage of 16V is used as the supply voltage for this driver.A constant voltage is maintained at 16V.
LB11961-TLM-H Features
Applications : Fan Motor Driver
Load voltage across the chip 4.5V~16V
base on LB11961 number
designed with 1 outputs
LB11961-TLM-H Applications
There are a lot of ON Semiconductor LB11961-TLM-H motor drivers applications.
- LED ballasts
- Indicator circuit
- LED bias
- PDAs
- Footwell lighting
- General lighting
- drivers for outdoor application
- LCD displays
- Automotive applications
- Landscape lighting