L6598D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6598 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1mA |
| Voltage - Supply (Vcc/Vdd) | 8V~16.6V |
| Quiescent Current | 2mA |
| Control Features | EN |
| Input Voltage (Min) | 8.7V |
| Topology | Half-Bridge |
| Control Technique | RESONANT CONTROL |
| Breakdown Voltage | 600V |
| Supply Current-Max (Isup) | 3mA |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 10.7V |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6598D013TR Overview
16-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.A range of 8V~16.6V supply voltages (Vcc/Vdd) can be used.As a result, it has had 16 terminations.In this ac/dc converter, there are 16 pins.Up to 16 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .A similar acdc converter can be searched by using the L6598 family.A total of 2 outputs need to be run.AC to DC converter is set to 1mA for the output current.AC to DC converter reaches high efficiency when operated at a frequency of 400kHz .SVHC for REACH can be found in the standard No SVHC .This AC to DC converter should always be set to 12V .The number of channels is 1 .When the current is at 2mA , AC to DC converter consumes quiescent current.
L6598D013TR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
With 16 pins
Output Current at 1mA
With 1 channels on it
L6598D013TR Applications
There are a lot of STMicroelectronics L6598D013TR AC DC Converters applications.
- Wall switches
- Battery chargers for mobile devices with touchpad display
- Z-Wave
- Utility meters
- Adapters
- Consumer electronics
- SMPS house keeping power supplies
- Off--line Battery Charger
- Automotive Clusters
- RCC SMPS