L6206N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | BCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Base Part Number | L6206 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Rise Time | 250ns |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Release Time | 550 ns |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Motor Type | Brushed |
| Current - Peak Output | 5.6A |
| Load Type | Inductive |
| Height | 3.3mm |
| Length | 31.75mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6206N Overview
H bridge is packaged using Tube.H bridge is provided in the 24-PowerDIP (0.300, 7.62mm) package for the sake of cost savings.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 8V~52V.Through Hole is mounted on H bridge circuit.A normal operation of -25°C~125°C TJ is enabled by motor driver H bridges operating temperature.There are a variety of applications for H bridge motor driver, including DC Motors, Stepper Motors, Voltage Regulators.The PCB is mounted wH gateh Through Hole.Among full bridges specific characteristics is Bootstrap Circuit.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 24 terminations.As H bridge ic of a signal interface, 24 pins are used as pronged contacts.Based on its base H bridge ic number of L6206, further related H bridge ics can be identified.The H bridge is powered by a voltage supply of 48V.H bridge circuit contains an analog IC type STEPPER MOTOR CONTROLLER.When the ambient temperature reaches 5.6A, the maximum load current of the power supply is reached.The maximum amount of current which output reaches 5.6A.As a result of the current flowing through the output and power supply pins, there is a current of 2.8A.A bridge driver's 24 pins work together in order to perform its specific functions.There are 4 outputs on this Hbridge.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 48V.52V represents the voltage released by the Hbridge.
L6206N Features
Available in 24-PowerDIP (0.300, 7.62mm) Package / Case
Operating Temperature at the range of Through Hole
Interface IC Type : L6206
Subcategory: 5.6A
Number of Receivers: 48V
L6206N Applications
There are a lot of STMicroelectronics L6206N Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for CPUs
- OA equipments
- DC-DC Converters
- High current, low profile DC-DC converters
- High-Current DC-DC Point-of-Load Converters
- Compact Blade Servers
- Industrial Automation
- Voltage Regulators for GPUs
- Quad DC motor
- Networking Microprocessor Voltage Regulators