L6206D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | BCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Base Part Number | L6206 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Load Type | Inductive |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6206D013TR Overview
Tape & Reel (TR) is used to package H bridge.As a cost-saving measure, H bridge is included in the 24-SOIC (0.295, 7.50mm Width) package.Based on the supply voltage of 8V~52V, improved reliabilbridge drivery can be ensured.H bridge circuit is mounted on Surface Mount.A normal operation of -25°C~125°C TJ is enabled by motor driver H bridges operating temperature.H bridge motor driver has many applications, including DC Motors, Stepper Motors, Voltage Regulators.Mount the board using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit.It is possible to terminate a transmission line with a 24 termination using the H bridge which matches the characteristic impedance of the transmission line.In a signal interface, the 24 pins serve as pronged contacts.Based on its base H bridge ic number of L6206, more closely related H bridge ics can be found.H bridge circuit operates on a voltage of 48V.The analog IC type is STEPPER MOTOR CONTROLLER.A power source can supply a maximum load current of 5.6A when the ambient temperature is specified.Currently, 2.8A current flows through the output and power supply pins.The 24 pins of this bridge driver work together to allow it to perform its specific functions.There is a 4 output on it.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.The operating supply voltage is kept at 48V to offer high efficiency.52V represents the voltage released by the Hbridge.
L6206D013TR Features
Available in 24-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6206
Number of Receivers: 48V
L6206D013TR Applications
There are a lot of STMicroelectronics L6206D013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- Non-V-Core
- Networking Microprocessor Voltage Regulators
- Optical disc drives
- Voltage Regulators for DDR memory arrays
- Industrial Automation
- Industrial Pumps
- CD players
- Small Form-Factor Voltage Regulator Modules
- High-Performance Gaming Motherboards
- Workstations