L298P013TR
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, Relays, Solenoids, Stepper Motors |
| Max Power Dissipation | 25W |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L298 |
| Pin Count | 20 |
| Max Output Current | 2A |
| Operating Supply Voltage | 42V |
| Number of Channels | 4 |
| Interface | Logic |
| Operating Supply Current | 50mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 4A |
| Output Characteristics | TOTEM-POLE |
| Collector Emitter Voltage (VCEO) | 46V |
| Max Collector Current | 4A |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Voltage - Load | 4.8V~46V |
| Fault Protection | Current Limiting, Over Temperature |
| Supply Voltage1-Nom | 42V |
| Switching Frequency | 25kHz |
| Built-in Protections | OVER CURRENT; THERMAL |
| Motor Type | Brushed |
| Load Type | Inductive |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L298P013TR Overview
H bridge is packaged using Tape & Reel (TR).In an effort to save money, H bridge is included in the 20-SOIC (0.433, 11.00mm Width) Exposed Pad package.Reliabilbridge drivery can be improved by increasing 4.5V~7V's supply voltage.H bridge circuit is mounted in the way of Surface Mount.Motor driver H bridge's operating temperature enables -40°C~150°C TJ to function normally.There are a variety of applications for H bridge motor driver, including DC Motors, Relays, Solenoids, Stepper Motors.On the PCB H gate is mounted using Surface Mount.20 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.In a signal interface, the 20 pins serve as pronged contacts.Its base H bridge ic number of L298 is the basis to find more related H bridge ics.For the operation of the H bridge, a voltage supply of 5V is used.An ambient temperature of 2A enables a power supply to provide a maximum load current.The output and power supply pins are flowing wH-bridgeh current 4A.It is through the 20 pins that the bridge driver can perform its specific functions.To ensure high efficiency, the operating supply voltage is maintained at 42V.
L298P013TR Features
Available in 20-SOIC (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L298
Number of Receivers: 42V
L298P013TR Applications
There are a lot of STMicroelectronics L298P013TR Full Bridge Drivers, Half-Bridge Drivers applications.
- PC peripherals
- Industrial Pumps
- DVD players
- Voltage Regulators for GPUs
- Small Form-Factor Voltage Regulator Modules
- DC-DC Converters
- Dual DC motor
- Telecom Microprocessor
- OA equipments
- Bipolar stepper motor