KAS2103E
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Contact Material | Phosphor Bronze |
| Mounting Type | Through Hole, Right Angle |
| Surface Mount | NO |
| Mounting Feature | THROUGH HOLE-RIGHT ANGLE |
| Insulation Material | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Housing Material | GLASS FILLED POLYBUTYLENE TEREPHTHALATE |
| Body Material | Polybutylene Terephthalate (PBT), Glass Filled |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2002 |
| Series | KAS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Positions | 3 |
| Voltage - Rated | 24VDC |
| Additional Feature | PACKAGING TAPE |
| Current Rating (Amps) | 25mA |
| Pitch | 0.100 2.54mm Full |
| Contact Finish | Gold |
| Termination Style | PC Pin |
| Body Breadth | 9.8806 mm |
| Actuator Type | Slide (Standard) |
| Circuit | SPST |
| Contact Resistance | 0.1mOhm |
| Insulation Resistance | 100000000Ohm |
| Contact Current(DC)-Max | 0.1A |
| Contact Voltage(DC)-Max | 50V |
| Dielectric Withstanding Voltage | 500VRMS V |
| Electrical Life | 2,000 Cycles |
| Mechanical Life | 2,000 Cycles |
| Switch Type | SLIDE DIP SWITCH |
| Contact Timing | BREAK-BEFORE-MAKE |
| Contact (DC) Max Rating R Load | 0.1A@50VDC |
| PCB Hole Count | 16 |
| Contact Function | ON-OFF |
| Washable | No |
| Actuator Level | Raised |
| Solderability | HAND |
| Length | 0.354 8.99mm |
| Body Height | 8.9916mm |
| Height Above Board | 0.390 9.90mm |
| RoHS Status | ROHS3 Compliant |
See Relate Datesheet