IXDN630MYI
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Supplier Device Package | TO-263-5 |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 9V~35V |
| Number of Outputs | 1 |
| Output Voltage | 9V |
| Max Output Current | 30A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 10μA |
| Output Current | 30A |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 20ns |
| Fall Time (Typ) | 20 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| RoHS Status | ROHS3 Compliant |
IXDN630MYI Overview
In order to increase flexibility, the package TO-263-6, D2Pak (5 Leads + Tab), TO-263BA is used.A packaging method of Tube is indicated.For its configuration, it incorporates 1 drivers.In this case, gate drivers is mounted along the way of Surface Mount.A supply voltage of 9V~35V demonstrates its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.This device is allowed to operate in a temperature range of -55°C~150°C TJ.Non-Inverting is used as its input type.The mount method is Surface Mount.As a maximum, there is 30A limit to the output current.Mosfet driver is based on a basis of 1 outputs that have been integrated.Mosfet gate drivers can deliver a current of 30A.There is a maximum operating temperature of 125°C.There is a minimum operating temperature of -40°C.In order for the device to operate, the supply voltage must be 35V.9V is the minimum voltage required to operate it.The voltage it outputs is 9V.With a 10μA supply voltage, it operates.For operation, mosfet gate drivers has 1 channels.
IXDN630MYI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN630MYI Applications
There are a lot of IXYS Integrated Circuits Division IXDN630MYI gate drivers applications.
- RGB applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Control
- Industrial Modules
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor controllers
- Commercial air-conditioning (CAC)
- Refrigerator
- Telecom switch mode power supplies
- PCMCIA applications