IXDN609YI
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Supplier Device Package | TO-263-5 |
| Weight | 1.59999g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Propagation Delay | 30 ns |
| Input Type | Non-Inverting |
| Rise Time | 22ns |
| Fall Time (Typ) | 15 ns |
| Rise / Fall Time (Typ) | 22ns 15ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| RoHS Status | ROHS3 Compliant |
IXDN609YI Overview
A higher degree of flexibility is achieved by adopting its TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package.Gate drivers is package in Tube case.Configuration is based on 1 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 4.5V~35V demonstrates its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -55°C~150°C TJ.The input type for this program is Non-Inverting.Mosfet driver is mounted using the Surface Mount method.The maximum output current can amount to 2A.For its basis, 1 outputs are integrated.There is a maximum operating temperature of 125°C.Operating temperatures can be as low as -40°C.The supply voltage of 35V is its maximum value for operation.For operation, 4.5V is the minimum supply voltage.The device operates on a voltage of 10μA as the supply voltage.There are 1 channels configured for operation.
IXDN609YI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN609YI Applications
There are a lot of IXYS Integrated Circuits Division IXDN609YI gate drivers applications.
- Isolated Supplies for controller area network (CAN),
- Uninterruptible Power Supplies (UPS)
- Dual-Battery Systems
- Telecom switch mode power supplies
- LCD/LCoS/DLP portable and embedded pico projectors
- High current laser/LED systems
- General Purpose 3-Phase Inverter
- Industrial Modules
- Isolated Gate Driver Supplies
- DC-DC Converters