IXDN609CI
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Supplier Device Package | TO-220-5 |
| Weight | 3.000003g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Element Configuration | Single |
| Output Current | 9A |
| Propagation Delay | 60 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 22ns |
| Fall Time (Typ) | 15 ns |
| Turn-Off Delay Time | 60 ns |
| Rise / Fall Time (Typ) | 22ns 15ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| RoHS Status | ROHS3 Compliant |
IXDN609CI Overview
A higher level of flexibility is provided by its TO-220-5 Formed Leads package.There is a package in the form of Tube.1 drivers are incorporated for its configuration.Gate drivers is mounted in the way of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.There is a gate type of IGBT, N-Channel, P-Channel MOSFET in this design.Temperature range -55°C~150°C TJ is allowed for this device.This program uses the input type of Non-Inverting.The mount method is Through Hole.There is a maximum output current of 9A that can be achieved.For its basis, there are 1 outputs integrated.The output current supported by the device is 9A.There is a maximum acceptable operating temperature of 125°C.Minimum operating temperatures are allowed to be -40°C.During operation, the supply voltage of 35V is its maximum value.In order for the device to operate, a supply voltage of 4.5V must be applied.The device operates on a voltage of 10μA as the supply voltage.For operation, mosfet gate drivers has 1 channels.
IXDN609CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN609CI Applications
There are a lot of IXYS Integrated Circuits Division IXDN609CI gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Automotive Applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Welding
- Dual-Battery Systems
- Solar inverters
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- High current laser/LED systems