IXDN604SI
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC-EP |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~35V |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Number of Channels | 2 |
| Voltage | 35V |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10μA |
| Output Current | 4A |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IXDN604SI Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.Tube is the form of the package.For its configuration, it incorporates 2 drivers.Surface Mount is mounted in the way.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~125°C TA.This program uses the input type of Non-Inverting.Surface Mount is the way it takes to mount the device.During design, it is configured with 8 pins.Mosfet driver is possible for the output current to be as low as 4A.The basis has 2 integrated outputs.An output current of 4A is supported.125°C is the maximum operating temperature that can be tolerated.Temperatures below -40°C are allowable as a minimum.In order for the device to operate, the supply voltage must be 35V.In order for the device to function, the supply voltage must be set to 4.5V.Powered by 10μA volts, it operates on a constant current.For operation, mosfet gate drivers has 2 channels.
IXDN604SI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDN604SI Applications
There are a lot of IXYS Integrated Circuits Division IXDN604SI gate drivers applications.
- Pulse transformer drivers
- Motor Controls
- Welding
- Power factor correction (PFC) circuits
- Industrial Power Supplies
- Refrigerator
- Industrial motor drives - compact, standard, premium, servo drives
- Industrial Motor Inverter - Power Tools, Robotics
- serial peripheral interface (SPI), I2C
- Automotive Applications