IXDN404SI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 µs |
| Built-in Protections | OVER CURRENT |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDN404SI Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is package in Tube case.Gate drivers is configured wGate driversh 2 drivers.It's mounted on the way to Surface Mount.In the absence of a 4.5V~35V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET has been used in its design.For this device, the temperature range is -55°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration starts with 8 terminations.There are various related parts under its base part number IXD*404.Surface Mount is the way it takes to mount the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.The interface IC of the device is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.Components with 8 pins are available.Mosfet driver supports an output current of 4A.Mosfet gate drivers is recommended that 35V be set as the operating supply voltage.
IXDN404SI Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDN404SI Applications
There are a lot of IXYS IXDN404SI gate drivers applications.
- DC/DC converters
- Telecom switch mode power supplies
- serial peripheral interface (SPI), I2C
- DC-DC Converters
- Commercial air-conditioning (CAC)
- Industrial Modules
- Active filtering
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Head-up and Head mounted displays
- High-voltage isolated DC-DC converters