IXDI502D1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Bulk |
| Published | 2010 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*502 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 3mA |
| Input Type | Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 9 ns |
| Rise / Fall Time (Typ) | 7.5ns 6.5ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.038 µs |
| Height Seated (Max) | 0.9mm |
| Length | 5mm |
| Width | 3.99mm |
| RoHS Status | RoHS Compliant |
IXDI502D1 Overview
For greater flexibility, the 6-VDFN Exposed Pad package is adopted.A packaging method of Bulk is indicated.Configuration is supported by 2 drivers.It's mounted on the way to Surface Mount.By using 4.5V~30V supply voltage, it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.There is a temperature range for this device of -55°C~150°C TJ.Input type of Inverting is used.Mosfet driver is based on 6 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IXD*502.Surface Mount is the way it takes to mount the device.When the device is designed, it has 6 pins.With a supply voltage of 15V, it is designed to operate.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.There are 6 component pins on the board.Using its power supply of 4.5/30V, it provides solutions to diverse power supply problems.As a rule of thumb, the operating supply voltage should be set to 15V.
IXDI502D1 Features
Embedded in the Bulk package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
6 pins
IXDI502D1 Applications
There are a lot of IXYS IXDI502D1 gate drivers applications.
- Motor Control
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Line drivers
- serial peripheral interface (SPI), I2C
- UPS systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Smart Phones
- Solar inverters
- Video amplifiers