IXDF504SIA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*504 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 10mA |
| Propagation Delay | 40 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 16ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 9ns 8ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.06 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 3V |
| Turn Off Time | 0.05 µs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDF504SIA Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Tube represents the packaging method.Configuration is based on 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.By using 4.5V~30V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel, P-Channel MOSFET.-55°C~150°C TJ is the allowed temperature range for this device.Mosfet driver uses Inverting, Non-Inverting as Mosfet drivers input type.Its configuration is based on a total of 8 terminations.Many related parts can be found under its base part number IXD*504.You mount it with Surface Mount.Devices have 8 pins available.A supply voltage of 18V is required for operation.Mosfet driver utilizes the interface IC BUFFER OR INVERTER BASED MOSFET DRIVER.As a maximum, there is 4A limit to the output current.There are several useful electronic components within its subcategory MOSFET Drivers.The board has 8 component pins.With its power supplies of 4.5/30V, it solves the problems of power supply for a variety of applications.
IXDF504SIA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDF504SIA Applications
There are a lot of IXYS IXDF504SIA gate drivers applications.
- Motor controllers
- Commercial and agricultural vehicles (CAV)
- Portable Media Players
- Telecom switch mode power supplies
- White Goods - Air Conditioner, Washing Machine,
- High power buffers
- Isolated Supplies for Motor Control
- LCD/LCoS/DLP portable and embedded pico projectors
- General Purpose 3-Phase Inverter
- High current laser/LED systems