IXDF404SIA
| Parameters | |
|---|---|
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.059 μs |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 449.991981mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~35V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*404 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 35V |
| Nominal Supply Current | 3mA |
| Output Current | 4A |
| Input Type | Inverting, Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 17 ns |
| Rise / Fall Time (Typ) | 16ns 13ns |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
IXDF404SIA Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tube represents the packaging method.For its configuration, it incorporates 2 drivers.Gate drivers is mounted in the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~35V supply voltage.This gate type has a IGBT, N-Channel, P-Channel MOSFET design.For this device, the temperature range is -55°C~150°C TJ.This program uses the input type of Inverting, Non-Inverting.Initially, the configuration is composed of 8 terminations.Numerous related parts can be found under its base part number IXD*404.Mounting the device requires Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.There is an interface IC called BUFFER OR INVERTER BASED PERIPHERAL DRIVER that is employed in this device.The board has a total of 8 component pins.This device is capable of delivering 4A current.A voltage of 35V should be set for the operating supply voltage.
IXDF404SIA Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
IXDF404SIA Applications
There are a lot of IXYS IXDF404SIA gate drivers applications.
- High frequency line drivers
- serial peripheral interface (SPI), I2C
- Smart Phones
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- Digitally controlled power supplies
- Power factor correction (PFC) circuits
- Isolated Supplies for controller area network (CAN),
- General Purpose 3-Phase Inverter
- Portable Media Players