IXDD630CI
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Supplier Device Package | TO-220-5 |
| Weight | 3.000003g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 12.5V~35V |
| Number of Outputs | 1 |
| Output Voltage | 12.5V |
| Max Output Current | 30A |
| Number of Channels | 1 |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 12.5V |
| Operating Supply Current | 10μA |
| Output Current | 30A |
| Propagation Delay | 65 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 11ns |
| Fall Time (Typ) | 11 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 11ns 11ns |
| Channel Type | Single |
| Number of Drivers | 1 |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 30A 30A |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| RoHS Status | ROHS3 Compliant |
IXDD630CI Overview
The TO-220-5 package offers greater flexibility.Tube represents the package.Gate drivers is configured wGate driversh 1 drivers.Through Hole is the way in which it is mounted.When the supply voltage is 12.5V~35V it is able to demonstrate its superiority.The gate type on this device is IGBT, N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed -55°C~150°C TJ.Non-Inverting is used as the input type.The device is mounted with Through Hole.The maximum output current can amount to 30A.The basis of this system consists of 1 outputs.Mosfet gate drivers can deliver a current of 30A.Mosfet gate drivers is permissible to operate at a temperature of 125°C.Temperatures below -40°C are allowed as the minimum.When the supply voltage is 35V, it is at its maximum operation.In order for the device to operate, a supply voltage of 12.5V must be applied.When this voltage is produced, it is marked as 12.5V.Powered by 10μA volts, it operates on a constant current.Operation is configured with 1 channels.
IXDD630CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDD630CI Applications
There are a lot of IXYS Integrated Circuits Division IXDD630CI gate drivers applications.
- Portable Navigation Devices
- UPS systems
- Automotive Applications
- Video amplifiers
- High power buffers
- High current laser/LED systems
- Motor controllers
- Isolated Supplies for controller area network (CAN),
- Pulse transformer drivers
- High frequency line drivers