IXDD509PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Weight | 599.989307mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IXD*509 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Nominal Supply Current | 75mA |
| Input Type | Non-Inverting |
| Rise Time | 45ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 25ns 23ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 9A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 9A 9A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height Seated (Max) | 4.57mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
IXDD509PI Overview
The 8-DIP (0.300, 7.62mm) package provides greater flexibility.A packaging method of Tube is used.There are 1 drivers installed for this device.Through Hole is mounted in the way.A supply voltage of 4.5V~30V demonstrates its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel, P-Channel MOSFET gate.In this device, temperatures must not exceed -55°C~150°C TJ.Non-Inverting is used as the input type.It's configured with 8 terminations.Many related parts can be found under its base part number IXD*509.Mosfet driver is mounted using the Through Hole method.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 18V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.A total of 8 pins are available for component connections.
IXDD509PI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
IXDD509PI Applications
There are a lot of IXYS IXDD509PI gate drivers applications.
- Refrigerator
- Isolated Supplies for controller area network (CAN),
- Motor controllers
- Solar power supplies
- High-speed communications
- Portable Media Players
- Motor Controls
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- PCMCIA applications