IXDD408CI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Weight | 3.000003g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 17W |
| Voltage - Supply | 4.5V~25V |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Time@Peak Reflow Temperature-Max (s) | 35 |
| Base Part Number | IXD*408 |
| Pin Count | 3 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 25V |
| Nominal Supply Current | 3mA |
| Output Current | 8A |
| Input Type | Non-Inverting |
| Rise Time | 18ns |
| Fall Time (Typ) | 19 ns |
| Rise / Fall Time (Typ) | 14ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.042 µs |
| Output Peak Current Limit-Nom | 8A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 8A 8A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 3.5V |
| Turn Off Time | 0.038 µs |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
IXDD408CI Overview
For greater flexibility, its TO-220-5 package is used.A packaging method of Tube is used.The configuration is supported by 1 drivers.It's mounted on the way to Through Hole.WGate driversh a 4.5V~25V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel, P-Channel MOSFET is designed for it.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.There are 5 terminations to form the base of its configuration.Mosfet driver contains a variety of related parts under Mosfet drivers base part number IXD*408.The mount method is Through Hole.When the device is designed, it has 5 pins.The device is specifically designed to operate at 18V volts.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.The board has a total of 3 component pins.The device is capable of delivering a current of 8A.According to its maximum power dissipation, 17W is capable of conducting and transferring a large amount of power without overheating.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 25V.
IXDD408CI Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
5 pins
Maximum power dissipation of 17W
IXDD408CI Applications
There are a lot of IXYS IXDD408CI gate drivers applications.
- Industrial Power Supplies
- Telecom switch mode power supplies
- Commercial air-conditioning (CAC)
- Portable Navigation Devices
- Welding
- 3-Phase Motor Inverter Driver
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- DC/DC converters
- serial peripheral interface (SPI), I2C