ITS612N1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | TO-220-7 |
| Number of Pins | 7 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 7 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -30°C |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Pin Count | 3 |
| Lead Pitch | 2.54mm |
| Max Output Current | 4A |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 2 |
| Voltage | 16V |
| Max Supply Voltage | 43V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 36W |
| Nominal Supply Current | 600μA |
| Current | 10mA |
| Power Dissipation | 36W |
| Max Supply Current | 600μA |
| Current - Output | 3.5A |
| Max Input Voltage | 16V |
| Output Current per Channel | 2.3A |
| Nominal Input Voltage | 34V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Turn On Time | 400 µs |
| Load Current | 4A |
| Output Peak Current Limit-Nom | 4.4A |
| Turn Off Time | 400 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 4.4mm |
| Length | 9.9mm |
| Width | 9.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ITS612N1 Overview
There is a TO-220-7 package that includes this.Currently, there are 2 channels accessible.Total terminations are 7.Device position ZIG-ZAG is its terminal position.Total number of pins is 3.A supply voltage of 12V can result in high efficiency.A 7 pin is used for operation.The gadget in Peripheral Drivers is self-contained.Through Hole is the direction in which it is positioned.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 85°C°C.Hot-swappable device works at a minimum temperature of -30°C degrees Celsius to maintain reliabilHot-swappable devicey.A maximum voltage of 43VV can be supplied to it.Hot Swap can work wHot Swaph as low a supply voltage as feasible, such as 5VV.To meet the operation criteria, the maximum output current drops to 4A.In order for it to operate, a current of 600μA is required.160mOhm-resistance is one of the characteristics of the device.
ITS612N1 Features
The terminal position of 3
ITS612N1 Applications
There are a lot of Infineon Technologies ITS612N1 hot swap controllers applications.
- Automatic restart after load failure
- Base station power distribution system
- Raid
- Telecom server
- Continuous monitoring of device temperature
- Switch
- Redundant-array-of-independent-disk (RAID) storage
- Network router
- Industrial application
- Comprehensive analog and digital capabilities