ITS4060SSJNXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 120mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.5W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 34V |
| Interface | On/Off |
| Current - Output (Max) | 2.6A |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 180 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 230 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 3.1A |
| Rds On (Typ) | 50m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ITS4060SSJNXUMA1 Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.In order to operate, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 2.6AV.The supply voltage can be 13.5V for high efficiency.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 120mOhm ohms.It is recommended to set the supply voltage to 34V for optimum efficiency.
ITS4060SSJNXUMA1 Features
Supplied from 13.5V
Resistance of 120mOhm
ITS4060SSJNXUMA1 Applications
There are a lot of Infineon Technologies ITS4060SSJNXUMA1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Gaming
- Notebook PC
- Hot Swap
- Portable Music Players
- Wireless Modem Data Cards
- Portable/Handheld Devices
- USB Ports/Hubs
- USB Power Distribution