ISPLSI 1048E-90LT
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 71MHz |
| Propagation Delay | 12.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-90LT Overview
A mobile phone network consists of 192macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 128-LQFP.It is equipped with 96I/O ports.There are 128 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.A voltage of 5Vprovides power to the device.It is a part of family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].It is mounted in the way of Surface Mount.It is a type of FPGA belonging to the ispLSI? 1000E series.There are 128pins on the chip.This device is also capable of displaying [0].The ISPLSI 1048shows its related parts.A digital circuit can be constructed using 8000gates.In total, there are 48 logic elements/blocks.Currently, it is powered by 5Vsources.Supply voltage (Vsup) reaches a maximum of 5.25V.The status of input signals is detected by 8dedicated inputs.Ensure that the supply voltage (Vsup) exceeds 4.75V.The clock frequency of the device should not exceed 71MHz.
ISPLSI 1048E-90LT Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-90LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-90LT CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Code converters
- Power Meter SMPS
- State machine control
- Storage Cards and Storage Racks
- Digital designs
- Multiple DIP Switch Replacement
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O expansion
- I/O PORTS (MCU MODULE)