ISL84544IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPDT, SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84544IBZ Overview
Shipping overseas is convenient with the electronic component packed in SOIC. The advanced packaging method Bulk provides high reliability. In total, there are 8 terminations. As a result of its 1 channels, this electronic component provides high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. Analog switches have 60Ohm internal resistance. Datasheets for functions of 8 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analogue multiplexer with a Single supply type that is cost-effective. 2.7V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 100pA. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Temperatures over 85°C should not be allowed for the multiplexer to operate. The switch device is capable of conducting in a 2-bit mode.
ISL84544IBZ Features
1 Channels
100pA Supply Current
2-Bit
ISL84544IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84544IBZ Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Signal routing between systems
- E1 Multiplexer
- Industrial and process control systems
- Automatic test equipment
- Cellular phones
- Remote Powered Equipment
- Industrial
- MP3 players
- Isolation