ISL84051IVZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 225Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100mA |
| Max Supply Current | 1μA |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Off-state Isolation-Nom | 90 dB |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 50ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
ISL84051IVZ Overview
The electronic component is convenient to ship overseas because it is packed in a TSSOP. Total terminations are 16. A 8 channel electronic part produces high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. There are 1 circuits in this switch device. Analog switches have 225Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. 2V is the lowest voltage the electrical component should receive. This multiplexer would work with 1μA current. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. With dual power supplies, you should attach at least 2V. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. Operating voltages of 9V are compatible with the electrical part. Additional features of the electronic component include: VIDEO APPLICATION. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
ISL84051IVZ Features
8 Channels
1μA Supply Current
Additional Features: VIDEO APPLICATION
ISL84051IVZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84051IVZ Analog Switches & Multiplexers ICs applications.
- Transmit
- SDH
- Cellular phones
- Data switching
- Digital access cross connects
- Switching Systems
- Mechanical reed relay replacement
- Cable Modem
- Data Acquisition Systems
- Battery-powered systems