ISL8105ACRZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 10 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 5V |
| Temperature Grade | COMMERCIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 25A |
| Frequency (Max) | 660kHz |
| Voltage - Output | 12V |
| Input Voltage (Min) | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 660kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 100 % |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
ISL8105ACRZ Overview
Capsuled in the DFN package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Using this switching controller, it is possible to switch at 660kHz. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. Various 10 terminations. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 5V. Switching converter has a total of 10 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4.5V. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. It is suggested that users apply 12V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. At 0°C and above, dc regulator should be kept. There should be 70°C more than 70°C degrees Celsius in the machine. A total of 1 functions are present in the switch converters. There is a maximum frequency of 660kHz that can be switched by the controller. With 25A inputs, switching controller is ideal. During normaloperations, it outputs a value of 12V.
ISL8105ACRZ Features
Switching Frequency: 660kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ISL8105ACRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL8105ACRZ DC to DC converter applications.
- Wind power
- Hydrogen power
- Planers
- Servo drive system
- Window air conditioners
- Surge protection circuits
- Direct power supply system
- Post equipment
- Various precision measuring instruments
- Smoke prevention equipment