ISL6540ACRZ
| Parameters | |
|---|---|
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | ISL6540 |
| JESD-30 Code | S-PQCC-N28 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.97V~22V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~2MHz |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
ISL6540ACRZ Overview
In the 28-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tube surrounds pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2.97V~22V and has a 2.97V~22V supply voltage. Qualified to work in a 0°C~70°C TA dc switcher. Switching can be done at 250kHz~2MHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start is included in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. The 28 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. In addition to "ISL6540", there are other relevant dc to dc converter ics you can find. This dc dc voltage regulator should be powered by a voltage of 3.3V. The dc to dc regulator can only accept 20V input voltage.
ISL6540ACRZ Features
Transistor Driver Outputs
Switching Frequency: 250kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ISL6540ACRZ Applications
There are a lot of Renesas Electronics America Inc. ISL6540ACRZ DC to DC converter applications.
- Domestic water pumps
- Experimental setup
- Post equipment
- Sink circuits
- Precision electronic equipment
- Hydrogen power
- Hydro power
- Bending machines
- Remotely powered electric motors
- Combined machine tools