ISL55111IVZ
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16, 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 3.5A |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current per Channel | 300mA |
| Rise Time | 6.2ns |
| Fall Time (Typ) | 6.9 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Output Peak Current Limit-Nom | 3.5A |
| High Side Driver | NO |
| Height | 900μm |
| Length | 3mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
ISL55111IVZ Overview
A cost-saving measure is taken to include H bridge in the TSSOP package.Using Surface Mount, the board is mounted.8 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.With a supply voltage of 12V, H bridge circuit operates.A power source can supply a maximum load current of 3.5A when the ambient temperature is specified.It is through the 16, 8 pins that the bridge driver can perform its specific functions.It is equipped with a 2 output.This H bridge motor driver falls under the subcategory of MOSFET Drivers. It is similar to other parts within that category.A load is supplied with electricity by 3/5V.In order to avoid excessive costs, the maximum acceptable operating temperature is 85°C.Accordingly, -40°C is an acceptable minimum operating temperature in order to avoid incurring excessive costs.
ISL55111IVZ Features
Available in TSSOP Package / Case
Operate supply voltage at -40°C
ISL55111IVZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL55111IVZ Full Bridge Drivers, Half-Bridge Drivers applications.
- High-Current DC-DC Point-of-Load Converters
- Bipolar stepper motor
- VTR
- Voltage Regulators for GPUs
- DC-DC Converters
- OA equipments
- High current, low profile DC-DC converters
- Audio-visual equipment
- Voltage Regulators for DDR memory arrays
- DVD players