ISL43L840IRZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Package / Case | QFN EP |
| Number of Pins | 16 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 750mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 50nA |
| Max Supply Current | 50nA |
| Propagation Delay | 33 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Off-state Isolation-Nom | 65 dB |
| On-state Resistance Match-Nom | 0.12Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL43L840IRZ-T Overview
Presented in QFN EP, this electrical component is convenient for overseas shipping. The total number of terminations is 16. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. An switch multiplexer with 750mOhm internal resistance has a value of 750mOhm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. The lowest voltage the electronic part should receive is 1.6V. This digital switch can be operated with a current of 50nA. Put voltage above 50nA on the multiplexer to cause damage. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. The electronic component can function from 3V. Temperatures above 85°C should not be used to operate the switches.
ISL43L840IRZ-T Features
2 Channels
50nA Supply Current
ISL43L840IRZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43L840IRZ-T Analog Switches & Multiplexers ICs applications.
- Fiber to the Home
- Battery Powered Systems
- Intelligent PBX
- CSU
- Communications systems
- Cable Modem
- E1 Network Equipment
- Automatic test equipment
- Frame Relay Equipment
- FTTH