ISL43121IHZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Resistance | 20Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Pin Count | 8 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Turn On Delay Time | 35 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL43121IHZ-T Overview
Presented in SOT-23-8, this electrical component is convenient for overseas shipping. As part of its design, the 8 series is equipped with this electronic component. A 20Ohm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 2.7V. An operating current of 1μA would be sufficient for this switch device. A digital multiplexer may suffer damage if voltage is applied above 1μA. During operation, the multiplexer should not be exposed to a temperature above 85°C. It conducts in a 2-bit manner.
ISL43121IHZ-T Features
1μA Supply Current
2-Bit
ISL43121IHZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL43121IHZ-T Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- SONET
- Sample hold systems
- Battery Powered Instruments
- Avionics and Military Systems
- Cross Connects
- CSU
- SDH
- Fault Tolerant Systems
- T1/E1 Terminals