IRS26302DJTRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead), 32 Leads |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 4.6W |
| Voltage - Supply | 10V~20V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IRS26302DJPBF |
| Qualification Status | Not Qualified |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 4.6W |
| Output Current | 200mA |
| Max Supply Current | 20mA |
| Propagation Delay | 710 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 190ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.71 μs |
| Output Peak Current Limit-Nom | 0.2A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.71 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 4.572mm |
| Length | 16.6624mm |
| Width | 16.6624mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IRS26302DJTRPBF Overview
A higher degree of flexibility is achieved by adopting its 44-LCC (J-Lead), 32 Leads package.Gate drivers is package in Tape & Reel (TR) case.This device is equipped with 6 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 10V~20V.Gate type IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.Input type of Non-Inverting is used.44 terminations constitute its foundation.Mosfet driver is possible to find various related parts under Mosfet drivers base part number IRS26302DJPBF.Devices are mounted by Surface Mount.A total of 44 pins are available on the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.Mosfet driver is possible to achieve a maximum output current of 350mA.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A high-side voltage can be set up to 600V (Bootstrap).An output current of 200mA is supported.Its maximum power dissipation of 4.6W also demonstrates its maximum ability to transfer power without overheating.Mosfet gate drivers is recommended that you keep the supply current at 20mA in order to achieve greater stabilMosfet gate driversy.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.A resistance value of 100Ohm is required to operate this device.
IRS26302DJTRPBF Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel MOSFET
44 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 4.6W
Resistance of 100Ohm
IRS26302DJTRPBF Applications
There are a lot of Infineon Technologies IRS26302DJTRPBF gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- UPS systems
- Motor Control
- Multicolor LED/laser displays
- Smart Phones
- Digitally controlled power supplies
- Industrial Modules
- DC-DC Converters
- Motor controllers
- Isolated switch mode power supplies (SMPS)