IR25603PBF
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1996 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Voltage - Supply | 10V~15.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IR25603 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 100mV |
| Max Output Current | 25mA |
| Nominal Supply Current | 5mA |
| Output Current | 260mA |
| Input Type | RC Input Circuit |
| Rise Time | 80ns |
| Fall Time (Typ) | 40 ns |
| Rise / Fall Time (Typ) | 80ns 45ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 180mA 260mA |
| High Side Voltage - Max (Bootstrap) | 600V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
IR25603PBF Overview
Gate drivers provides greater flexibilGate driversy to use the 8-DIP (0.300, 7.62mm) package.Tube represents the package.The configuration is supported by 2 drivers.Through Hole is the way in which it is mounted.By using 10V~15.6V supply voltage, it is able to demonstrate its superiority.This device is designed with a N-Channel MOSFET gate type.This device is allowed to operate in a temperature range of -40°C~150°C TJ.RC Input Circuit is the input type used in this program.As a result of its configuration, it contains a maximum of 8 terminations.Under its base part number IR25603, various related parts can be found.Mounting the device requires Through Hole.In the device, there are 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.In the maximum case, the output current can be 25mA volts.There are various useful electronic components in its subcategory MOSFET Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).Mosfet driver is based on a basis of 1 outputs that have been integrated.The device is capable of delivering a current of 260mA.Having the maximum power dissipation of 625mW indicates its maximum capacity to conduct power losses without overheating.Mosfet gate drivers produces a voltage of 100mV.
IR25603PBF Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
IR25603PBF Applications
There are a lot of Infineon Technologies IR25603PBF gate drivers applications.
- Line drivers
- 3-Phase Motor Inverter Driver
- Portable Navigation Devices
- Solar inverters
- Isolated switch mode power supplies (SMPS)
- Broadcast equipment
- Welding
- RGB applications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Supplies for Motor Control